Hager
Socomec
The COUNTIS AM10 is a modular active energy meter designed for single phase networks. This product used for direct connections up to 32 A.
COUNTIS Adc is an energy meter for 48 VDC networks with a direct reading of consumptions in kWh.
The COUNTIS AM is a modular active energy meter designed for single phase networks.
This product is available in two versions:
- the AMd: used for direct connections up to 32 A,
- the AMt: used for connections up to 100 A via a current transformer.
COUNTIS AT is an active energy meter designed for two-phase and three-phase networks. This product is available in two versions:
- ATv2: non-insulated active energy meter which cannot be used with earthed CT,
- ATiv2: insulated active energy meter which can be used with earthed CT secondaries.
The COUNTIS ATd is a direct powered instrument designed for applications in sub-metering three phase active energy up to 80 A. This product is based on a principle which is unique on the market, using direct passage measurement with 3 or 4 cables (with or without neutral) or via standard connection terminals. Passing cables through holes means that from 3 or 4 cables, 3 currents and 3 voltages can be measured and the device can be powered. Measurement of voltages and power supply are made through insulation piercing screws.
COUNTIS ATPv2 is an insulated active energy meter designed for two-phase and three-phase LV networks.
The COUNTIS Ci is a pulse collector communicating via an RS485 link using JBUS/MODBUS protocol®. Through 7 insulated on/off inputs, it counts the number of pulses from different energy meters (water, air, gas, electricity,...) and transmits this information to a PC equipped with CONTROL VISION software or PLC.
The DIRIS Am is a multi-function meter for measuring electrical values for single, two and three phase low and high voltage networks. All the parameters can be configured and displayed on its front panel display and the following functions used:
- measurement,
- hours run meter,
- energy meter,
- communication.
The DIRIS A20 is a multi-function meter for measuring electrical values in all low voltage networks. All the parameters can be configured and displayed on its front panel and measuring and timing functions used. In addition DIRIS A20 has a function for correcting connection errors.
DIRIS A40 and A41 are multi-function meter for measuring the extent of electrical values for all LV/HV networks. They allow starting from the front panel to configure and display all the electric parameters and to exploit the functions of measurement, metering and energies management, harmonics analysis, remote control and control state of control devices, communication and detection of high voltages, peaks and voltage disconnections. In addition, DIRIS A40 and A41 have a function for correcting connection errors.
Overview Energy Metering:
| Download file |  |
(404 KB) |
For more information, download this file
| 1. | COUNTIS AM10 | |
263 | KB |
| 2. | COUNTIS Adc | |
294 | KB |
| 3. | COUNTIS Amd COUNTIS Amt | |
372 | KB |
| 4. | COUNTIS ATv2 COUNTIS ATiv2 | |
781 | KB |
| 5. | COUNTIS Atd | |
355 | KB |
| 6. | COUNTIS ATPv2 | |
609 | KB |
| 7. | COUNTIS Ci | |
754 | KB |
| 8. | DIRIS Am | |
916 | KB |
| 9. | DIRIS A20 | |
893 | KB |
| 10. | DIRIS A40 DIRIS A41 | |
1,31 |
MB |
| 11. | Communication Interfaces | |
454 | KB |
| 12. | DIRIS VISION Software | |
431 | KB |
| 13. | CONTROL VISION Software | |
823 | KB |
| 14. | BILLING APPLICATION Software | |
349 | KB |