Hager
Socomec
COMO C are manually operated multipolar changeover switches. They provide changeover, source inversion or switching under load between two low voltage power circuits, as well as safety isolation.
SIRCO VM1 changeover switches are manually operated three or four pole
switches. They provide changeover, source inversion or switching under load between two low voltage power circuits, as well as their safety isolation.
SIRCOVER products are manually operated multipolar changeover switches. They ensure switching, transfer of sources or transfer of two low voltage circuits on load as well as their safety disconnection.
SIRCOVER BY-PASS are manually operated changeover switches. They are a combination of three interlocked switches enabling the use with 3 + 6 pole or 4 + 8 pole. They insulate by providing simultaneous safety isolation top and bottom and by passing loads or low voltage circuits mainly during maintenance operations.
ATyS products are 3 and 4-pole switches remotely controlled by volt free contacts (ATyS 3) or automatic transfer switches (ATyS 6).
They are a combination of two load-break switches mounted back to back electrically and mechanically interlocked. They provide manual switching or remote controlled source inversion or changeover under load, of two low voltage power circuits.
ATyS C30 / C40 allows any type of changeover control: ATyS 3, SMV, contactors, circuit breakers or other motorised switches.
Overview Changover Switches:
| Download file |  |
(371 KB) |
For more information, download this file
| 1. | COMO C | |
1,06 | MB |
| 2. | SIRCO VM1 Changeover | |
1,05 | MB |
| 3. | SIRCOVER and SIRCOVER BY - PASS | |
3,79 | MB |
| 4. | ATyS | |
385 | KB |
|
1,64 | MB | ||
|
4,96 | MB | ||
|
321 | KB | ||
|
327 | KB | ||
|
250 | KB |